Asset Publisher Asset Publisher

robots

Request Workshop

Workshop title Robots
Name of Institution
Location of institution ‎ Dubai
Date 01 Jan 2018
Number of participants 20
Target age group ‎12 – 15‎
Email fablab_admin@liferay.com
Mob. No.‎

robots

Duaration
01/01/2018
05:00 PM To 06:00 PM
Available Seats 20 (From 20)
Target Age ‎12 – 15‎

About the workshop: Trainees learn during this workshop the basics of 2D design, which is one of the most important means of manufacturing Where the trainees will design different shapes and then cut them using the laser cutting machine

 

Workshop Themes:

- Introduction to 2D design.

- The need for two-dimensional design in life.

- Mechanism of laser cutting machine.

- Use the laser cutting machine.

- Design and manufacture of various projects.

 

Registration fee: FREE

Average (2 Votes)


Discussion Board

when is it exactly ?
Posted on 12/3/17 2:34 PM.
When and where is the workshop
Pks send details
Posted on 12/4/17 8:09 AM.
Is it totally free workshop??
Posted on 12/5/17 3:06 PM.

2D design

Request Workshop

Workshop title 2D design
Name of Institution
Location of institution ‎ Dubai
Date 01 Jan 2018
Number of participants 20
Target age group ‎12 – 15‎
Email fablab_admin@liferay.com
Mob. No.‎

2D design

Duaration
01/01/2018
05:00 PM To 06:00 PM
Available Seats 20 (From 20)
Target Age ‎12 – 15‎

About the workshop: Trainees learn during this workshop the basics of 2D design, which is one of the most important means of manufacturing Where the trainees will design different shapes and then cut them using the laser cutting machine

 

Workshop Themes:

- Introduction to 2D design.

- The need for two-dimensional design in life.

- Mechanism of laser cutting machine.

- Use the laser cutting machine.

- Design and manufacture of various projects.

 

Registration fee: FREE

Average (0 Votes)


Discussion Board

3D design

Request Workshop

Workshop title 3D design
Name of Institution
Location of institution ‎ Dubai
Date 01 Jan 2018
Number of participants 20
Target age group ‎‎6 – 11
Email fablab_admin@liferay.com
Mob. No.‎

3D design

Duaration
01/01/2018
05:00 PM To 06:00 PM
Available Seats 20 (From 20)
Target Age ‎‎6 – 11

About the workshop: Trainees learn during this workshop the basics of 2D design, which is one of the most important means of manufacturing Where the trainees will design different shapes and then cut them using the laser cutting machine

 

Workshop Themes:

- Introduction to 2D design.

- The need for two-dimensional design in life.

- Mechanism of laser cutting machine.

- Use the laser cutting machine.

- Design and manufacture of various projects.

 

Registration fee: FREE

Average (1 Vote)


Discussion Board

Electronics and programming

Request Workshop

Workshop title Electronics and programming
Name of Institution
Location of institution ‎ Dubai
Date 01 Jan 2018
Number of participants 20
Target age group ‎12 – 15‎
Email fablab_admin@liferay.com
Mob. No.‎

Electronics and programming

Duaration
01/01/2018
05:00 PM To 06:00 PM
Available Seats 20 (From 20)
Target Age ‎12 – 15‎

About the workshop: Trainees learn during this workshop the basics of 2D design, which is one of the most important means of manufacturing Where the trainees will design different shapes and then cut them using the laser cutting machine

 

Workshop Themes:

- Introduction to 2D design.

- The need for two-dimensional design in life.

- Mechanism of laser cutting machine.

- Use the laser cutting machine.

- Design and manufacture of various projects.

 

Registration fee: FREE

Average (0 Votes)


Discussion Board

Introduction to digital manufacturing

Request Workshop

Workshop title Introduction to digital manufacturing
Name of Institution
Location of institution ‎ Dubai
Date 01 Jan 2018
Number of participants 20
Target age group ‎12 – 15‎
Email fablab_admin@liferay.com
Mob. No.‎

Introduction to digital manufacturing

Duaration
01/01/2018
05:00 PM To 06:00 PM
Available Seats 20 (From 20)
Target Age ‎12 – 15‎

About the workshop: Trainees learn during this workshop the basics of 2D design, which is one of the most important means of manufacturing Where the trainees will design different shapes and then cut them using the laser cutting machine

 

Workshop Themes:

- Introduction to 2D design.

- The need for two-dimensional design in life.

- Mechanism of laser cutting machine.

- Use the laser cutting machine.

- Design and manufacture of various projects.

 

Registration fee: FREE

Average (0 Votes)


Discussion Board

Posted on 11/25/17 10:48 AM.

Burj Khalifa with a lower lighting

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title Burj Khalifa with a lower lighting Project ‎Category Science
Project/ Research Abstract As shown in the picture, the project is a miniature microprocessor made using the laser cutting machine and the Arduino. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

Burj Khalifa with a lower lighting

As shown in the picture, the project is a miniature microprocessor made using the laser cutting machine and the Arduino.
Average (0 Votes)


Discussion Board

Posted on 6/19/17 1:08 PM.

Android Paint

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title Android Paint Project ‎Category Science
Project/ Research Abstract Five female students from Al-Nuaimiya School in Ajman were trained in the programming of the Ebtikar robot to draw different geometric shapes. The students underwent a month-long training in which they learned the basics of programming the robot. An application route for smartphones where the application communicates with Android via Bluetooth. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

Android Paint

Five female students from Al-Nuaimiya School in Ajman were trained in the programming of the Ebtikar robot to draw different geometric shapes. The students underwent a month-long training in which they learned the basics of programming the robot. An application route for smartphones where the application communicates with Android via Bluetooth.
Average (0 Votes)


Discussion Board

Posted on 6/22/17 8:07 AM.

Boxes contain Lltlskvb

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title Boxes contain Lltlskvb Project ‎Category Science
Project/ Research Abstract The fund was created by a 3D printer and was designed to make a container for the telescope project for students Jawahar and Mashael Ashkanani. The project was part of a science competition. We are thinking of a telescope made using a cheap web camera. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

Boxes contain Lltlskvb

The fund was created by a 3D printer and was designed to make a container for the telescope project for students Jawahar and Mashael Ashkanani. The project was part of a science competition. We are thinking of a telescope made using a cheap web camera.
Average (0 Votes)


Discussion Board

Stereogram for a skull of cork

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title Stereogram for a skull of cork Project ‎Category Science
Project/ Research Abstract The design of this open-source skull is one example of the 123D Maker program and the laser cutting machine was used to cut two-dimensional parts in a way that can be assembled to form a three-dimensional shape. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

Stereogram for a skull of cork

The design of this open-source skull is one example of the 123D Maker program and the laser cutting machine was used to cut two-dimensional parts in a way that can be assembled to form a three-dimensional shape.
Average (1 Vote)


Discussion Board

FabLab RoboBot V3.0

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title FabLab RoboBot V3.0 Project ‎Category Science
Project/ Research Abstract The third version of the robot has a fully enclosed external hood and LED lights. Six students from Sumaya Bent Khayat School from Masfout area in Ajman were trained by the students to program the robot to overcome the obstacles and represent the students at the Science Fair 2016. At the closing ceremony of the 18th session For the award. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

FabLab RoboBot V3.0

The third version of the robot has a fully enclosed external hood and LED lights. Six students from Sumaya Bent Khayat School from Masfout area in Ajman were trained by the students to program the robot to overcome the obstacles and represent the students at the Science Fair 2016. At the closing ceremony of the 18th session For the award.
Average (0 Votes)


Discussion Board

FabLab RoboBot V1.1

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title FabLab RoboBot V1.1 Project ‎Category Science
Project/ Research Abstract A robotics workshop was held with Al Khansaa Elementary School students during the Innovation Week. The Parallex robot structure was abandoned. The robot structure was rebuilt using acrylic and the laser cutting machine was used to cut the robot's structure. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

FabLab RoboBot V1.1

A robotics workshop was held with Al Khansaa Elementary School students during the Innovation Week. The Parallex robot structure was abandoned. The robot structure was rebuilt using acrylic and the laser cutting machine was used to cut the robot's structure.
Average (0 Votes)


Discussion Board

FabLab RoboBot V1.0

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title FabLab RoboBot V1.0 Project ‎Category Science
Project/ Research Abstract Robobot is a three-wheeled robot with a distance sensor where the robot skips obstacles. The Parallex robot has been modified. Parallex has been replaced with the Arduino and the robot is intended to become an educational robot to introduce students to basic robotics. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

FabLab RoboBot V1.0

Robobot is a three-wheeled robot with a distance sensor where the robot skips obstacles. The Parallex robot has been modified. Parallex has been replaced with the Arduino and the robot is intended to become an educational robot to introduce students to basic robotics.
Average (0 Votes)


Discussion Board

Intelligent Radar Project

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title Intelligent Radar Project Project ‎Category Science
Project/ Research Abstract The project is an intelligent radar will change the speed of tuning vehicles for the visibility of the road, where a group of students Nuaimiya school to take intensive workshops in the Fab Lab, the UAE learned through which two-dimensional and cutting design laser as well as programming Alordueno, a control unit used in the project, where the project depends on a range of different sensors such as dust sensor, rain sensor and humidity sensor to measure the vision of the road for earners for drivers depending on the radar sensor data by changing the speed setting to force drivers to slow down during bad weather or situations of Vision executions. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

Intelligent Radar Project

The project is an intelligent radar will change the speed of tuning vehicles for the visibility of the road, where a group of students Nuaimiya school to take intensive workshops in the Fab Lab, the UAE learned through which two-dimensional and cutting design laser as well as programming Alordueno, a control unit used in the project, where the project depends on a range of different sensors such as dust sensor, rain sensor and humidity sensor to measure the vision of the road for earners for drivers depending on the radar sensor data by changing the speed setting to force drivers to slow down during bad weather or situations of Vision executions.
Average (0 Votes)


Discussion Board

Smart Automation Power Saving

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title Smart Automation Power Saving Project ‎Category Science
Project/ Research Abstract This project won the first place in the science competition. We think about the school category in 2015 and qualified for the Intel competition for the Arab world. A new external structure was built in Fab Lab UAE using the laser cutting machine. The project is a smart house to save energy using different sensors and a dedicated control system. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

Smart Automation Power Saving

This project won the first place in the science competition. We think about the school category in 2015 and qualified for the Intel competition for the Arab world. A new external structure was built in Fab Lab UAE using the laser cutting machine. The project is a smart house to save energy using different sensors and a dedicated control system.
Average (0 Votes)


Discussion Board

An open-source dinosaur

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title An open-source dinosaur Project ‎Category Science
Project/ Research Abstract This dinosaur was made using a laser cutting machine, an open-source design from FlatLab designed to showcase the capabilities of the laser cutting machine in the laboratory and to train on the collection of 3D shapes. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

An open-source dinosaur

This dinosaur was made using a laser cutting machine, an open-source design from FlatLab designed to showcase the capabilities of the laser cutting machine in the laboratory and to train on the collection of 3D shapes.
Average (0 Votes)


Discussion Board

The Geneva wheel

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title The Geneva wheel Project ‎Category Science
Project/ Research Abstract The Geneva wheel is a wheel that transforms the full circular motion to the intermittent movements and the Geneva wheel in the image, which was designed and simulated using SolidWorks. It is manufactured using the 3D printer and the laser cutting machine. The cube rotates 90 degrees at a time. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

The Geneva wheel

The Geneva wheel is a wheel that transforms the full circular motion to the intermittent movements and the Geneva wheel in the image, which was designed and simulated using SolidWorks. It is manufactured using the 3D printer and the laser cutting machine. The cube rotates 90 degrees at a time.
Average (0 Votes)


Discussion Board

Automated spider

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title Automated spider Project ‎Category Science
Project/ Research Abstract Automated Spider is an open source project that was manufactured, assembled and programmed in Fab Lab UAE to learn the basics of robotics with legs in terms of design, assembly and programming. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

Automated spider

Automated Spider is an open source project that was manufactured, assembled and programmed in Fab Lab UAE to learn the basics of robotics with legs in terms of design, assembly and programming.
Average (0 Votes)


Discussion Board

Souvenir of martyrs

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title Souvenir of martyrs Project ‎Category Science
Project/ Research Abstract The students were helped to print a mock-up of the Minkraft game to participate in the Kuwait Innovation Contest, a competition in the GCC. The students designed a souvenir for UAE martyrs and the stereotype was made using the 3D printer. The printing process took about 9 hours. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

Souvenir of martyrs

The students were helped to print a mock-up of the Minkraft game to participate in the Kuwait Innovation Contest, a competition in the GCC. The students designed a souvenir for UAE martyrs and the stereotype was made using the 3D printer. The printing process took about 9 hours.
Average (0 Votes)


Discussion Board

E-Future City

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title E-Future City Project ‎Category Science
Project/ Research Abstract A team of three students from the Institute of Applied Technology was sponsored to carry out a project that provides electricity to participate in a science competition. The idea of remote control is to operate the electric water heater by the water and electricity department. The water heaters will be put off at least two hours a day. Electricity consumption The students conducted a survey on the extent to which consumers use water heaters and found that 60% of them do not completely extinguish the heater. The students designed the outer cover of the project using a laser cutting machine and programmed the project using the Ardino. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

E-Future City

A team of three students from the Institute of Applied Technology was sponsored to carry out a project that provides electricity to participate in a science competition. The idea of remote control is to operate the electric water heater by the water and electricity department. The water heaters will be put off at least two hours a day. Electricity consumption The students conducted a survey on the extent to which consumers use water heaters and found that 60% of them do not completely extinguish the heater. The students designed the outer cover of the project using a laser cutting machine and programmed the project using the Ardino.
Average (0 Votes)


Discussion Board

A sign of happiness

Request Project/ Research in Fablab UAE

Applicant Data
Name Fablab Admin Company / School
Area Degree/ Work Experience
Phone Email fablab_admin@liferay.com
gouls_of_project aa
Project/ Research Data
Project/ ‎Research ‎title A sign of happiness Project ‎Category Science
Project/ Research Abstract In line with the UAE's directives and the initiative of His Highness Sheikh Mohammed bin Rashid Al Maktoum to measure the public satisfaction and satisfaction with government services, Fabal Lab UAE's happiness index was designed and manufactured. The project structure was manufactured using a laser cutting machine and then used as a control unit for the project. Measuring the audience's satisfaction with the services of the lab, as well as limiting the number of visitors to the lab at the same time. Project Goals
Project/‎ Research Team Members
Name Employer Career Role in the ‎Project Mob. No.‎
Requirements
Required ‎Services Workshops
Suitable Times for ‎Implementing the ‎Project/ Research
Suitable Times for ‎Implementing the ‎Project/ Research
Required ‎Tools/ ‎Machines/ ‎Components ‎to Finish the ‎Project/ ‎Research
Notes

A sign of happiness

In line with the UAE's directives and the initiative of His Highness Sheikh Mohammed bin Rashid Al Maktoum to measure the public satisfaction and satisfaction with government services, Fabal Lab UAE's happiness index was designed and manufactured. The project structure was manufactured using a laser cutting machine and then used as a control unit for the project. Measuring the audience's satisfaction with the services of the lab, as well as limiting the number of visitors to the lab at the same time.
Average (0 Votes)


Discussion Board

X
Thank you for your evaluation.
-------
ممتاز
‏5
Excellent
جيد
‏4‏
Good
متوسط
‏3‏
Average
مقبول
‏2‏
Fair
ضعيف
‏1‏
Poor
-------
Speaker/Trainer
أولاً – المحاضر/ المدرب
Scientific ability & knowledge ‎
مقدرته العلمية وتمكنه من موضوع ‏البرنامج
1.
Style of presentation & delivery of ‎information
أسلوبه في العرض والتقديم
2.
Interaction & response with the ‎audience
تفاعله مع المشاركين والتجاوب ‏معهم
3.
Use of applied examples ‎
درجة استخدامه للأمثلة التطبيقية
4.
Speaker’s ability to deliver the ‎information
قدرة المدرب على إيصال المعلومة
5.
Scientific Material
ثانياً – المادة العلمية
Coherence and consistency of the ‎topics
ترابط وانسجام الموضوعات ‏
1.
Scientific material presented is ‎related to the subject of scientific ‎training
علاقة المادة العلمية المعروضة ‏بموضوع التدريب ‏
2.
Knowledge and skills gained
المعارف والمهارات المكتسبة‏
3.
Benefits gained
درجة الاستفادة من البرنامج
4.
Workshops and its effectiveness in ‎gaining skill ‎
ورش العمل وفاعليتها في إكساب ‏المهارة
5.
Organizational Aspects
ثالثاً – النواحي التنظيمية
Duration‏ ‏‎ of the session and timing
مدة البرنامج ومواعيد عقده
1.
Venue and services provided
مكان عقد البرنامج والخدمات المقدمة
2.
The Overall Program
رابعاً – البرنامج بوجه عام
The overall evaluation ‎
التقييم العام ‏
1.
Suggestions & Remarks
ملاحظات واقتراحات عامة
X
Thank You,We will contact you as soon as possible.

Request Real Tour

X
This workshop is private, please enter its code so you can attend.